All RSS Feed stacks are suddenly not working

(Michael Frankland) #7

Thanks @Franz - Wall is still working but can understand that working with RSS feeds can be frustrating. Hope you get a resolution soon.

(Franz Rathmair) #8

Hi Michael,

I don’t understand why RSS feeds are working in your Wall demo, but not in my Wall page? Can you give me a hint?



Franz Rathmair | Mobil: +43 650 53 46 175 | Web:

(Michael Frankland) #9

Sure @Franz - do you have a link to your page?

The latest is 1.4.5 - make sure you are using 1.4.4 at least as there were some changes regarding RSS in sub pages:

(J Qualum) #10

Hi Will
Please do. Feedslider is the only RSS feed stack that works for me, too (albeit, not in one of my websites, for some reason).

(Lutz Cleffmann) #11

Hi Will,
I ran into the same problem. What I would like to have is just a simple ticker derived from the RSS feed on my pages.
The existing tickers on the test site Franz created don’t seem to work at all.
As I am using it on a lot of pages I am prepared to pay part of the development costs, not just buy the stack.
Drop me a mail, it this is a possibility.

(EricW) #12

I used to make use of Yahoo Pipes to concatenate RSS feeds, filter items on content and (nice feature) sorting them by date. This way you could impersonate a new RSS-feed (e.g. on Feedburner) and dynamically feed it fully controlled by the designer. I am not familiar with the stacks mentioned, but see it as a functionality to enhance existing stacks (if not in it already ;)) as I started to move to IFTTT to work with multiple feeds at the same time to find equivalent functinality… and without great succes up till now.

(Franz Rathmair) #13

Hi Michael,

I appreciate your help. Thanks for the hint to upgrade the Wall stack to 1.4.5. I checked, the current version is 1.4.5

Then I placed the stack only unto the home page, using your own feed burner link that your stack supplies ( There is an improvement: Now it shows 4 items in preview. But when I upload the page, nothing is shown online. :frowning:

I noticed that using a URL like does not result in showing the items even in preview, but your link does (

Is this a clue to finding a solution?



(Will Woodgate) #14

@miguelximenez The problem with Facebook and Twitter is that their APIs are very volatile. I know this, because I have worked with these APIs in the past. If you remember back several years, I used to have free stacks that could embed a Twitter feed and suchlike.

These free stacks got killed-off when Twitter and Facebook messed things up at their end. The InstaViewer stack I have has been severely crippled as a direct consequence of Instagram culling a large part of their developer API. And more recently the free MicroBlog stack barely works for anybody - again as a result of changes with Tumblr and their whole API going up s*** creek for the benefit of the EU GDPR police.

Twitter and Facebook APIs continue to be subjected to major changes or discontinuation with little warning or suitable alternatives. Additionally they expose website users to questionable data harvesting practices. Shady stuff I don’t really want to be any part of.

I would do my utmost to avoid ever building code or APIs borrowed from these types of services into my own stacks. It just would not be economically viable at $10 a shot. If I were to release an RSS / social media stack that required constant updates to keep it working with the likes of Twitter or Facebook, I would want to be charging about £500 a copy to make it anywhere close to worthwhile, for me to do. I’m serious.

A more generalised RSS feed stack would be feasible. Like with FeedSlider, I would prefer to use my own PHP backend to fetch the RSS file and parse it into the webpage as HTML. I would avoid the use of any third-party APIs or other stuff that would risk this thing breaking. I like to keep things simple and build stuff that will work reliably for a long time. In other words, I want complete control over the entire codebase.

If you simply want to fetch the last dozen or so news articles from your own blog and show them on a website homepage sidebar or grid, then that is definitely the sort-of thing I can say without doubt is technically feasible and I’d have interest in doing. But trying to pull stuff from social media sites would be of little itnerest to me, without the financial bribe.

(Miguel Jiménez Oña) #15

I understand. Thanks for your explanation.
Even and only a RSS feed stack without social media, I think is fair enough, Will.

(Richard Nicholls) #16

As a temporary measure I’ve replaced my feed stacks with code from
It’s a bit basic, but has got me out of a pickle with a list of over 100 podcast episodes.

(Michael Frankland) #17

Thanks @Franz

Yes that could be it… try firstly putting your Feed through Feedburner then putting that into the Stack (the output feed)

The other things with RSS feeds is that there are differences and to accommodate all the parsing is difficult.

(Franz Rathmair) #18

Hi Michael,

using feed burner didn’t make a difference. The only stack that is working continues to be feedslicer. It takes my xml-File as well as feedburner. The Wall and others don’t like either of them…



Franz Rathmair | Mobil: +43 650 53 46 175 | Web:

(Michael Frankland) #19

Hmmmm - it’s most likely the format that it doesn’t like. It that case it might not be possible to use that particular feed with Wall on this project. Am always looking to improve and add updates so will see on improving the RSS parsing. Thanks

(Franz Rathmair) #20

Hi Michael, too bad that this RSS theme is so complicated. Thanks for trying to find a solution to get it working for me and others using the Wall stack.



Franz Rathmair | Mobil: +43 650 53 46 175 | Web:

(Michael Frankland) #21

As noted above Yahoo chopped down their RSS API and killed lots of sites across the Internet. Feed Stack has been updated so it not longer has this issue anymore and won’t do going into the future.


(Franz Rathmair) #22

Hi Michael,

I would gladly exchange my not-working WALL stack which I purchased solely because of RSS Feed import, with you new Feed Stack, if that were possible. To buy the whole Oak collection because of this one stack is not possible for me.

Thanks for your work on the RSS dilemma, you seem to be the first who succeeded! Congratulations!

Kind regards,


Franz Rathmair | Mobil: +43 650 53 46 175 | Web:

(Michael Frankland) #23

Wall supersedes this Feed Stack but I’ll send you a demo to have a play with anyway :slight_smile: @Franz

(Franz Rathmair) #24

Hi Michael,

thanks for the demo version. It is working on my test site, great! Then I tried it in one of my websites where I need it and was halted by white spaces instead of photos. Is there a license code that I need to use? How much do you charge for the stack by itself? Thanks.


PS: The stack pulls in 10 items - how can that number be changed?

Franz Rathmair | Mobil: +43 650 53 46 175 | Web:

(Michael Frankland) #25

Really glad you like this update @Franz and glad it made an impact on your project! :star_struck:

Can you send me a link about the white space images - not sure what is happening. The Stack pulls in the whole feed so please check with your original RSS feed composer that you are spitting out more than 10 items :slight_smile:

I’ll send you a private message about your questions, thanks

(system) #26

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.