# Cannot publish website **URL:** \ **Category:** RapidWeaver Classic\ **Created:** [April 18, 2016, 10:04am UTC](https://forums.realmacsoftware.com/t/cannot-publish-website/6384 "2016-04-18T10:04:04Z")\ **Posts on this page:** 1\ **Showing post:** 5
**Author:** ![Turtle](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/turtle/32/1438_2.png) [@Turtle](https://forums.realmacsoftware.com/u/Turtle)\ **Post date:** [April 18, 2016, 6:44pm UTC](https://forums.realmacsoftware.com/t/cannot-publish-website/6384/5 "2016-04-18T18:44:33Z")
Hi Elaine > [@sanderson01](#): > > I’ve tried every combination with and without but latest was /public\_html/sanderson-windows.co.uk OK, in the site settings do you have [http://sanderson-windows.co.uk](http://sanderson-windows.co.uk) set as the web address (Wrench icon → General)? In your Publishing bookmark for the site, verify that your protocol is correct (FTP or SFTP), Verify that your server is correct ([ftp.sanderson-windows.co.uk](http://ftp.sanderson-windows.co.uk) or whatever your host tells you to use and add a :PORT# if the host tells you to), Your username and password should be good but make sure the case is observed, if you type a lowercase letter where there needs to be an uppercase then that can cause issues, same with substituting 0/O and I/1 - just be aware of this if needed otherwise ignore. Path should be configured to what the host tells you, some use **/** some use **/public** , some use **/public\_html** , some use **public\_html** and there are a multitude of other site root folders for a website but the hosts support docs should tell you the entire configuration. Once you have those things checked off, if you have no success publishing, I would give the host a shout and go through the settings with them until publishing is resolved. Hope that helps. Brad --- _[View the full topic](https://forums.realmacsoftware.com/t/cannot-publish-website/6384)._