# Clickable email link that follows **URL:** \ **Category:** RapidWeaver Classic\ **Created:** [May 27, 2025, 3:29pm UTC](https://forums.realmacsoftware.com/t/clickable-email-link-that-follows/47785 "2025-05-27T15:29:53Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![zamboknee](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/zamboknee/32/25532_2.png) [@zamboknee](https://forums.realmacsoftware.com/u/zamboknee)\ **Post date:** [May 27, 2025, 3:29pm UTC](https://forums.realmacsoftware.com/t/clickable-email-link-that-follows/47785/1 "2025-05-27T15:29:53Z")
I have a Foundry 2 site. Wondering if there’s a way to put in a clickable email link that essentially follows the scroll? Or at the very least is located at a specific point? As in, an easily noticeable email link where my product/service demo is located. Thanks ---
**Author:** ![Heroic\_Nonsense](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/heroic_nonsense/32/20666_2.png) [@Heroic\_Nonsense](https://forums.realmacsoftware.com/u/Heroic_Nonsense)\ **Post date:** [May 27, 2025, 5:50pm UTC](https://forums.realmacsoftware.com/t/clickable-email-link-that-follows/47785/2 "2025-05-27T17:50:32Z")
Hi @zamboknee, To be clear, you want to send an email with a link, and when the recipient of that email clicks that link, you want to: - have your site open on the recipient’s device - then automatically scroll to the right spot on a page Correct? You can do that using an anchor, which you add to the URL that you put in the email. If you have the Foundry 2 Potion Pack add-on, here’s how (if you do not own the Potion Pack add-on for Foundry, you can still do the same with an [HTML anchor](https://www.w3docs.com/snippets/html/how-to-create-an-anchor-link-to-jump-to-a-specific-part-of-a-page.html), but it’s ugly and more fiddly): - Open your RapidWeaver project - Scroll down to the bit that you want the visitor to see when they click the link in your email - In your Foundry 2 collection of stacks, you’ll find _Anchor_ (but **only** if you have the _Foundry 2 Potion Pack_ installed): - Drag it into your project, on the spot on the page where you’d want your email recipient to end up: - Note that, when you preview or publish your page, the anchor itself will remain invisible. It’s there, to be found if a visitor enters the URL with the anchor’s name attached (see below0, but for all other purposes - it’s not there. - In the Anchor stack’s settings, make sure “Include icon” is unchecked, and enter a good, short name (without spaces!) in the “Anchor name” field. I entered “demo” here: - Publish your page Now, in the email that you’ll send out, add the link to the page in question, but add a pound symbol (#) and then the anchor’s name to the end. So for example: ```auto https://examplesite/examplepage/index.html#demo ``` … assuming you named your anchor “demo”. Send out the email, and when a recipient clicks on the link, he will be taken to the section where your anchor is located on the page. Presto! Cheers, Erwin ---
**Author:** ![zamboknee](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/zamboknee/32/25532_2.png) [@zamboknee](https://forums.realmacsoftware.com/u/zamboknee)\ **Post date:** [May 27, 2025, 6:16pm UTC](https://forums.realmacsoftware.com/t/clickable-email-link-that-follows/47785/3 "2025-05-27T18:16:42Z")
Wow. Thanks Erwin. Super detailed and very appreciative. I think I wasn’t clear in my original post. This is more for people who come to the website, check out my demo and want to get in touch with me. I want to create a visual button/clickable in the area of the demo so that they don’t have to hunt around for ‘contact’ info. ---
**Author:** ![zamboknee](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/zamboknee/32/25532_2.png) [@zamboknee](https://forums.realmacsoftware.com/u/zamboknee)\ **Post date:** [May 27, 2025, 6:19pm UTC](https://forums.realmacsoftware.com/t/clickable-email-link-that-follows/47785/4 "2025-05-27T18:19:40Z")
Also, does anyone have a copy of the Foundry 2 documentation? ---
**Author:** ![zamboknee](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/zamboknee/32/25532_2.png) [@zamboknee](https://forums.realmacsoftware.com/u/zamboknee)\ **Post date:** [May 27, 2025, 6:36pm UTC](https://forums.realmacsoftware.com/t/clickable-email-link-that-follows/47785/5 "2025-05-27T18:36:29Z")
Found a way. I just used the ‘Sticky Content’ stack from Foundry and put a ‘Button’ stack (Foundry). [Here it is.](https://www.moosevoice.com/demos/index.php) ---
**Author:** ![Heroic\_Nonsense](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/heroic_nonsense/32/20666_2.png) [@Heroic\_Nonsense](https://forums.realmacsoftware.com/u/Heroic_Nonsense)\ **Post date:** [May 28, 2025, 6:30am UTC](https://forums.realmacsoftware.com/t/clickable-email-link-that-follows/47785/6 "2025-05-28T06:30:11Z")
No problem! I completely misread your question. Good thing you figured a solution by yourself 🙂 The Foundry 2 documentation has been taken offline, but you can still access parts of it on the Wayback Machine (**[link](https://web.archive.org/web/20240918151208/https://f2docs.elixirgraphics.com/)**). Unfortunately the videos don’t work. Cheers, Erwin