# Drift by Joe Workman with scroll delay

**URL:** <https://forums.realmacsoftware.com/t/drift-by-joe-workman-with-scroll-delay/54611>\
**Category:** RapidWeaver Classic\
**Created:** [February 22, 2026, 7:43am UTC](https://forums.realmacsoftware.com/t/drift-by-joe-workman-with-scroll-delay/54611 "2026-02-22T07:43:05Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![macfms](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/macfms/32/367_2.png) [@macfms](https://forums.realmacsoftware.com/u/macfms)\
**Post date:** [February 22, 2026, 7:43am UTC](https://forums.realmacsoftware.com/t/drift-by-joe-workman-with-scroll-delay/54611/1 "2026-02-22T07:43:05Z")

</div>

HI together,

I try to build a special sliding effect with Drift from Joe Workman but I can’t find the right solution and need some help.

I have 4 pages that you can change by scrolling down. Page 1 and 4 are normal ones.

Page 2 and 3 are one table with 2 rows 50:50.

When you scroll down to page 2 you should see on the left half some Text and on the right a Picture. When you try to scroll to page 3 the Picture slides from right to left and you see some Text on the right row which now represents page 3 (picture on the left and text on the right).

The sliding mechanism works fine and it starts when the full page 2 is visible (Start Position 100%, Trigger Top).

My problem is that in this version the user has no time to read the text because the slider starts immediately. I want to start this slider when the visitor scrolled a bit further (maybe 20 % of the page) without moving page 2 out of view. Same with page 3 by scrolling backwards.

I tried to make my Drift Container Sticky and put a container around with a height of 140 vh. But it didn’t work because Sticky wasn’t recognized. I also didn’t find a Pin I could use.

Any solution?

Thanks for help!

mac

---

<div class="post-metadata">

**Author:** ![RapidBase](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/rapidbase/32/24626_2.png) [@RapidBase](https://forums.realmacsoftware.com/u/RapidBase)\
**Post date:** [February 22, 2026, 9:40am UTC](https://forums.realmacsoftware.com/t/drift-by-joe-workman-with-scroll-delay/54611/2 "2026-02-22T09:40:18Z")

</div>

I think @joeworkman may eventually need a link to look at to be able to help you…