# Help - Can't see Stacks 3 in RW 7

**URL:** https://forums.realmacsoftware.com/t/help-cant-see-stacks-3-in-rw-7/20368
**Category:** RapidWeaver Classic
**Created:** [May 25, 2018, 10:33pm UTC](https://forums.realmacsoftware.com/t/help-cant-see-stacks-3-in-rw-7/20368 "2018-05-25T22:33:36Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![surfgeek](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/surfgeek/32/11072_2.png) [@surfgeek](https://forums.realmacsoftware.com/u/surfgeek)
#### Post date: [May 25, 2018, 10:33pm UTC](https://forums.realmacsoftware.com/t/help-cant-see-stacks-3-in-rw-7/20368/1 "2018-05-25T22:33:37Z")

</div>

I just upgraded from Stacks 2 to Stacks 3 and installed it…  
then I re-booted my Mac… and fired up Rapidweaver 7,  
opened up a project that I worked on previously,  
but I don’t see Stacks 3 displayed anywhere. ---- hmmmm???

Any suggestions folks?

Thanks in advance.

---

<div class="post-metadata">

### Author: ![surfgeek](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/surfgeek/32/11072_2.png) [@surfgeek](https://forums.realmacsoftware.com/u/surfgeek)
#### Post date: [May 25, 2018, 10:36pm UTC](https://forums.realmacsoftware.com/t/help-cant-see-stacks-3-in-rw-7/20368/2 "2018-05-25T22:36:09Z")

</div>

duhhhh… I see now. I have to start by creating a new project.  
It now displays Stacks 3. 🙂

---

<div class="post-metadata">

### Author: ![system](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/system/32/25301_2.png) [@system](https://forums.realmacsoftware.com/u/system)
#### Post date: [June 25, 2018, 8:36am UTC](https://forums.realmacsoftware.com/t/help-cant-see-stacks-3-in-rw-7/20368/3 "2018-06-25T08:36:11Z")

</div>

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.