# Manual number entry

**URL:** <https://forums.realmacsoftware.com/t/manual-number-entry/45485>\
**Category:** RapidWeaver Elements\
**Created:** [December 3, 2024, 9:35am UTC](https://forums.realmacsoftware.com/t/manual-number-entry/45485 "2024-12-03T09:35:40Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mrTablet](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/mrtablet/32/21819_2.png) [@mrTablet](https://forums.realmacsoftware.com/u/mrTablet)\
**Post date:** [December 3, 2024, 9:35am UTC](https://forums.realmacsoftware.com/t/manual-number-entry/45485/1 "2024-12-03T09:35:40Z")

</div>

Is it possible to get manual setting in addition to using slider?

 ![CleanShot](https://europe1.discourse-cdn.com/flex005/uploads/realmacsoftware1/original/3X/7/c/7cab8426443044699aa836a2cecd698927abe6a9.png)

---

<div class="post-metadata">

**Author:** ![ben](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/ben/32/28488_2.png) [@ben](https://forums.realmacsoftware.com/u/ben)\
**Post date:** [December 4, 2024, 8:44am UTC](https://forums.realmacsoftware.com/t/manual-number-entry/45485/2 "2024-12-04T08:44:07Z")

</div>

It’s on our list to add - can’t say exactly when we’ll get around to this though!

---

<div class="post-metadata">

**Author:** ![handshaper](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/handshaper/32/27373_2.png) [@handshaper](https://forums.realmacsoftware.com/u/handshaper)\
**Post date:** [December 5, 2024, 5:40pm UTC](https://forums.realmacsoftware.com/t/manual-number-entry/45485/3 "2024-12-05T17:40:03Z")

</div>

I sure hope it is sooner rather than later as this is a real pain point. I’ve often wondered why this was not working from day one. Trying to setup some values with a slider is cumbersome.