# Problem to control the hight of MovingBox Images and a unintentional blank slide

**URL:** <https://forums.realmacsoftware.com/t/problem-to-control-the-hight-of-movingbox-images-and-a-unintentional-blank-slide/5249>\
**Category:** RapidWeaver Classic\
**Created:** [February 4, 2016, 1:04am UTC](https://forums.realmacsoftware.com/t/problem-to-control-the-hight-of-movingbox-images-and-a-unintentional-blank-slide/5249 "2016-02-04T01:04:51Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![WDA](https://avatars.discourse-cdn.com/v4/letter/w/5f8ce5/32.png) [@WDA](https://forums.realmacsoftware.com/u/WDA)\
**Post date:** [February 4, 2016, 1:04am UTC](https://forums.realmacsoftware.com/t/problem-to-control-the-hight-of-movingbox-images-and-a-unintentional-blank-slide/5249/1 "2016-02-04T01:04:51Z")

</div>

I spend my whole day to find a way to control the hight of images inside JW MovingBox. For this project I use TotalCMS Images. Each of my project side should have a MovingBox slider with a different hight relative to the browser window size e.g. 50% of the hight. The only way I find to set up a relative hight for a TotalCMS is placing it as a warehouse image background into a Section Stack (BIG thanks to BIG WHITE DUCK for this hint). In this case the problem with the hight is solved, but a new problem is, that MovingBox add a black Slide at the end of the row.

Is this a MovingBox bug or a wrong setup? Or is there an other way to control the image hight inside MovingBox?

The same MovingBox works fine with a TotalCMS Image Stack, but in this case I can’t control the hight.  
At [http://sandbox.wolfademeit.de](http://sandbox.wolfademeit.de) you can see both versions. The first one used Sections, the second TotalCMS images inside MovingBox.