# Publishing Failure Version 7.4.1 (18708) .. HELP!

**URL:** <https://forums.realmacsoftware.com/t/publishing-failure-version-7-4-1-18708-help/14756>\
**Category:** RapidWeaver Classic\
**Created:** [June 18, 2017, 9:34pm UTC](https://forums.realmacsoftware.com/t/publishing-failure-version-7-4-1-18708-help/14756 "2017-06-18T21:34:27Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![hcluks](https://avatars.discourse-cdn.com/v4/letter/h/a5b964/32.png) [@hcluks](https://forums.realmacsoftware.com/u/hcluks)\
**Post date:** [June 18, 2017, 9:34pm UTC](https://forums.realmacsoftware.com/t/publishing-failure-version-7-4-1-18708-help/14756/1 "2017-06-18T21:34:28Z")

</div>

Hi… I have been updating pages and successfully publishing on a very regular basis over the last few months in a large, stable site.

I added a page today and the site publishes about 1,200 of 1,575 pages and crashes.

I tried to export to desktop… same thing happens.

Messages in the ‘i’ are: Operation was aborted by an application callback (3 of these of the 4 strings) and Operation was aborted by an application callback URL:ftp//:www.danj.us

---

<div class="post-metadata">

**Author:** ![BrandonCorlett](https://avatars.discourse-cdn.com/v4/letter/b/67e7ee/32.png) [@BrandonCorlett](https://forums.realmacsoftware.com/u/BrandonCorlett)\
**Post date:** [June 19, 2017, 1:34am UTC](https://forums.realmacsoftware.com/t/publishing-failure-version-7-4-1-18708-help/14756/2 "2017-06-19T01:34:13Z")

</div>

Just to be sure, did you try publishing a single page?  
This a can be dome by right clicking on a page name on the left hand side of RW.

---

<div class="post-metadata">

**Author:** ![hcluks](https://avatars.discourse-cdn.com/v4/letter/h/a5b964/32.png) [@hcluks](https://forums.realmacsoftware.com/u/hcluks)\
**Post date:** [June 19, 2017, 3:09am UTC](https://forums.realmacsoftware.com/t/publishing-failure-version-7-4-1-18708-help/14756/3 "2017-06-19T03:09:40Z")

</div>

Thank you!!! Painful… but I published sections at a time and got thru it all … Great Tip!

---

<div class="post-metadata">

**Author:** ![hcluks](https://avatars.discourse-cdn.com/v4/letter/h/a5b964/32.png) [@hcluks](https://forums.realmacsoftware.com/u/hcluks)\
**Post date:** [June 19, 2017, 4:21am UTC](https://forums.realmacsoftware.com/t/publishing-failure-version-7-4-1-18708-help/14756/4 "2017-06-19T04:21:58Z")

</div>

This worked… thank you again!!

---

<div class="post-metadata">

**Author:** ![BrandonCorlett](https://avatars.discourse-cdn.com/v4/letter/b/67e7ee/32.png) [@BrandonCorlett](https://forums.realmacsoftware.com/u/BrandonCorlett)\
**Post date:** [June 19, 2017, 4:37am UTC](https://forums.realmacsoftware.com/t/publishing-failure-version-7-4-1-18708-help/14756/5 "2017-06-19T04:37:55Z")

</div>

I’m glad that worked.

Since that worked I would check and see if it works for all pages again when you remove the page you just added. If so then something on that new page is the problem.

---

<div class="post-metadata">

**Author:** ![hcluks](https://avatars.discourse-cdn.com/v4/letter/h/a5b964/32.png) [@hcluks](https://forums.realmacsoftware.com/u/hcluks)\
**Post date:** [June 19, 2017, 6:49am UTC](https://forums.realmacsoftware.com/t/publishing-failure-version-7-4-1-18708-help/14756/6 "2017-06-19T06:49:39Z")

</div>

The new page was fine… there was a page with a bunch of stuff in the  
quarantine stack that crashed (i did all the pages individually). I deleted  
the quarantined content altogether and the page published.

\*\* I haven’t attempted to publish all again since I am in the equivalent  
place (as though I had done that)

Thanks again