# Publishing issue **URL:** \ **Category:** RapidWeaver Classic\ **Created:** [January 22, 2018, 11:37pm UTC](https://forums.realmacsoftware.com/t/publishing-issue/18193 "2018-01-22T23:37:20Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![rasavol](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/rasavol/32/20676_2.png) [@rasavol](https://forums.realmacsoftware.com/u/rasavol)\ **Post date:** [January 22, 2018, 11:37pm UTC](https://forums.realmacsoftware.com/t/publishing-issue/18193/1 "2018-01-22T23:37:20Z")
The publishing gets tricky with RW7. Several problems forced me to publish everything. The pubslihing settings are correct. After 6 uploaded files (of 620) publishing stops **without any error specification !!!** Here the two after two seconds constantly changing messages : ![13](https://europe1.discourse-cdn.com/flex005/uploads/realmacsoftware1/original/2X/e/ee6477a761bbf0ecc29ac13c306e6df210bce457.jpg) ![57](https://europe1.discourse-cdn.com/flex005/uploads/realmacsoftware1/original/2X/d/d96ea2c8d7d389cba0afaacf89f42f742da7a7d5.jpg) How can I find the file txt.rtf which perhaps causes the problem ? - How can I undue “Publishing all” ? To have partial pubslishing? Thank you for advice !! ---
**Author:** ![MarkSealey](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/marksealey/32/22895_2.png) [@MarkSealey](https://forums.realmacsoftware.com/u/MarkSealey)\ **Post date:** [January 23, 2018, 4:58am UTC](https://forums.realmacsoftware.com/t/publishing-issue/18193/2 "2018-01-23T04:58:17Z")
@rasavol, How many concurrent ftp processes do you have configured in Settings \> Publishing \> Connections? Some hosts stop users from using too many. Try reducing that to 1, then - if it works - go up to 2; repeat and so on until you may reach the maximum allowed by your host. You could use Spotlight to find all files called, TXT.rtf in your _RW_ site’s folder hierarchy. If there is only one, you’ve located the file which may be causing the trouble - assuming it’s not a problem with the number of concurrent connections (above). And assuming that is is always that file (and not, say, the sixth file) which is stopping publishing. If not, **from within _RW_** , change the filename to something like _TXT\_1.rtf_ and see whether the newly renamed file is where publishing stops. If it is, then you’ve found the culprit. If it’s not that (renamed) file, change its name back to _TXT.rtf_ and rename the next file which is revealed by Spotlight in the same way until one of then causes the halt. I’m sure when you’ve found the file, we can help you further. Good luck! ---
**Author:** ![system](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/system/32/25301_2.png) [@system](https://forums.realmacsoftware.com/u/system)\ **Post date:** [January 29, 2018, 5:05am UTC](https://forums.realmacsoftware.com/t/publishing-issue/18193/3 "2018-01-29T05:05:24Z")
This topic was automatically closed 6 days after the last reply. New replies are no longer allowed.