# Rapidwaever code completion

**URL:** <https://forums.realmacsoftware.com/t/rapidwaever-code-completion/5552>\
**Category:** RapidWeaver Classic\
**Created:** [February 24, 2016, 5:12pm UTC](https://forums.realmacsoftware.com/t/rapidwaever-code-completion/5552 "2016-02-24T17:12:47Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![studiozellige](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/studiozellige/32/16179_2.png) [@studiozellige](https://forums.realmacsoftware.com/u/studiozellige)\
**Post date:** [February 24, 2016, 5:12pm UTC](https://forums.realmacsoftware.com/t/rapidwaever-code-completion/5552/1 "2016-02-24T17:12:47Z")

</div>

Hello,

… Would anyone a trick to remove the damn completion function, permanently?  
It is intolerable and very little productive! …

Many thanks to my nerves … 😉

---

<div class="post-metadata">

**Author:** ![kryten](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/kryten/32/5313_2.png) [@kryten](https://forums.realmacsoftware.com/u/kryten)\
**Post date:** [February 24, 2016, 8:11pm UTC](https://forums.realmacsoftware.com/t/rapidwaever-code-completion/5552/2 "2016-02-24T20:11:02Z")

</div>

This has been mentioned a few times. I’m not aware of any workarounds or information from RMS about what the plan is for developing code completion into something that’s useful.

I totally get your pain. The best I can suggest is to use something else to write your code then paste it in.

---

<div class="post-metadata">

**Author:** ![Oscar](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/oscar/32/80_2.png) [@Oscar](https://forums.realmacsoftware.com/u/Oscar)\
**Post date:** [February 25, 2016, 9:24am UTC](https://forums.realmacsoftware.com/t/rapidwaever-code-completion/5552/3 "2016-02-25T09:24:18Z")

</div>

I write only in edit mode, or very quickly 😉

Edit: I see, I have misunderstood the first post.  
Not the refresh is the problem, excuse me please.

---

<div class="post-metadata">

**Author:** ![peterdanckwerts](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/peterdanckwerts/32/22443_2.png) [@peterdanckwerts](https://forums.realmacsoftware.com/u/peterdanckwerts)\
**Post date:** [February 25, 2016, 10:24am UTC](https://forums.realmacsoftware.com/t/rapidwaever-code-completion/5552/4 "2016-02-25T10:24:40Z")

</div>

@nikf Can we please get a way to switch code completion off? Or just get rid of it? It drives me mad. Far from helping, it prevents me from typing valid code.