# Run-time versions of RapidWeaber

**URL:** <https://forums.realmacsoftware.com/t/run-time-versions-of-rapidweaber/15058>\
**Category:** RapidWeaver Classic\
**Created:** [July 6, 2017, 7:23pm UTC](https://forums.realmacsoftware.com/t/run-time-versions-of-rapidweaber/15058 "2017-07-06T19:23:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![incalord](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/incalord/32/8260_2.png) [@incalord](https://forums.realmacsoftware.com/u/incalord)\
**Post date:** [July 6, 2017, 7:23pm UTC](https://forums.realmacsoftware.com/t/run-time-versions-of-rapidweaber/15058/1 "2017-07-06T19:23:29Z")

</div>

I would like to be able to compile a site in some form so that I may share it with other people who have Google, Safari, etc. I am talking about a site of 10 pages at the most.

In the past some of you may recall that we were able to compile programs on run-time versions. HyperCard was one of this examples.

---

<div class="post-metadata">

**Author:** ![Rovertek](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/rovertek/32/223_2.png) [@Rovertek](https://forums.realmacsoftware.com/u/Rovertek)\
**Post date:** [July 7, 2017, 2:14pm UTC](https://forums.realmacsoftware.com/t/run-time-versions-of-rapidweaber/15058/2 "2017-07-07T14:14:15Z")

</div>

Yeah, HyperCard times are long gone (pre-OSX).

I had a similar need in the past. From all the answers I got at that time, I gathered that the best (and possibly the only) way to do it is to use the free [MAMP](https://www.mamp.info/en/) application in combination with your website locally exported to a specific folder within MAMP’s installation.