# RW forgets Show/ Hide stack settings

**URL:** <https://forums.realmacsoftware.com/t/rw-forgets-show-hide-stack-settings/28663>\
**Category:** RapidWeaver Classic\
**Created:** [September 7, 2019, 9:45am UTC](https://forums.realmacsoftware.com/t/rw-forgets-show-hide-stack-settings/28663 "2019-09-07T09:45:05Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![OmarKN](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/omarkn/32/14654_2.png) [@OmarKN](https://forums.realmacsoftware.com/u/OmarKN)\
**Post date:** [September 7, 2019, 9:45am UTC](https://forums.realmacsoftware.com/t/rw-forgets-show-hide-stack-settings/28663/1 "2019-09-07T09:45:05Z")

</div>

(RW8.3, Stacks4.0.1, Foundry1.3x)

Hi and good day,

There seems to be an issue here with RW forgetting some stack settings, such as shown in the sreendump:  
(It’s the Show/ Hide setting for different devices.)  
In this case I’m using different kind of images (- sizes) for the devices.

 ![52](https://europe1.discourse-cdn.com/flex005/uploads/realmacsoftware1/original/3X/e/d/ed19f457d041011403c32a13c6e0371080e9d470.png)

This was consistent for all 20+ pages of the project.

Also RW 8.3 not very rarely becomes unresponsive, f ex when trying to select a stack, or it scrolls up to the top by itself??

What to do?

/

with best regards,

Omar K Neusser

Stockholm, Sweden

---

<div class="post-metadata">

**Author:** ![DLH](https://avatars.discourse-cdn.com/v4/letter/d/b5e925/32.png) [@DLH](https://forums.realmacsoftware.com/u/DLH)\
**Post date:** [September 7, 2019, 3:07pm UTC](https://forums.realmacsoftware.com/t/rw-forgets-show-hide-stack-settings/28663/2 "2019-09-07T15:07:32Z")

</div>

If you are running Stack 4.0.1, I would try the latest non-beta, which is 4.0.2. You can download it from YourHead’s website.

The controls you’re using to show and hide content are the built-in controls that Stacks provides to all stacks. I’m pretty sure that the breakpoints (screen widths) that Stacks uses for these are a bit different from the breakpoints Foundry uses. This may not be a problem for you, but if you use these show/hide settings along with other Foundry breakpoint settings (columns/grids etc.), you may run into some inconsistencies. You’re better off using the Visibility stack from the Foundry set.

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/system/32/25301_2.png) [@system](https://forums.realmacsoftware.com/u/system)\
**Post date:** [October 8, 2019, 1:07am UTC](https://forums.realmacsoftware.com/t/rw-forgets-show-hide-stack-settings/28663/3 "2019-10-08T01:07:34Z")

</div>

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.