# Unable to Publish after 8.4.1 upgrade

**URL:** <https://forums.realmacsoftware.com/t/unable-to-publish-after-8-4-1-upgrade/29822>\
**Category:** RapidWeaver Classic\
**Created:** [November 21, 2019, 12:11am UTC](https://forums.realmacsoftware.com/t/unable-to-publish-after-8-4-1-upgrade/29822 "2019-11-21T00:11:21Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![clawmd](https://avatars.discourse-cdn.com/v4/letter/c/96bed5/32.png) [@clawmd](https://forums.realmacsoftware.com/u/clawmd)\
**Post date:** [November 21, 2019, 12:11am UTC](https://forums.realmacsoftware.com/t/unable-to-publish-after-8-4-1-upgrade/29822/1 "2019-11-21T00:11:22Z")

</div>

I just upgraded to RW 8.4.1 using the built-in upgrade system. I have 3 sites, 2 of them work fine and one gives me an immediate “unable to Publish” message. All sites have been running for years.  
The message is immediate and has 2 lines ChucksFood, Saving project…  
Using Mojave 10.14.6 with basic RW stuff like Armadillo, FormLoom, sitemap plus, all of which are current, Testing FTP credentials works fine. method=FTP, connections=5, mode=extended passive, address [https://chucksfood.com](https://chucksfood.com). Not sure what to try next.

---

<div class="post-metadata">

**Author:** ![curiouschuck](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/curiouschuck/32/14064_2.png) [@curiouschuck](https://forums.realmacsoftware.com/u/curiouschuck)\
**Post date:** [November 21, 2019, 1:14am UTC](https://forums.realmacsoftware.com/t/unable-to-publish-after-8-4-1-upgrade/29822/2 "2019-11-21T01:14:37Z")

</div>

Everyone assumes their Publishing Setup doesn’t change following updates.  
Occasionally it does, so check that first.  
Also, I’m using the beta 3.2.0b1 for sitemap plus which works for me.

---

<div class="post-metadata">

**Author:** ![clawmd](https://avatars.discourse-cdn.com/v4/letter/c/96bed5/32.png) [@clawmd](https://forums.realmacsoftware.com/u/clawmd)\
**Post date:** [November 21, 2019, 4:39pm UTC](https://forums.realmacsoftware.com/t/unable-to-publish-after-8-4-1-upgrade/29822/3 "2019-11-21T16:39:24Z")

</div>

I checked publishing set up. Seems good and the test feature works properly

---

<div class="post-metadata">

**Author:** ![clawmd](https://avatars.discourse-cdn.com/v4/letter/c/96bed5/32.png) [@clawmd](https://forums.realmacsoftware.com/u/clawmd)\
**Post date:** [November 23, 2019, 1:49pm UTC](https://forums.realmacsoftware.com/t/unable-to-publish-after-8-4-1-upgrade/29822/4 "2019-11-23T13:49:04Z")

</div>

Solved! Somehow the upgrade caused the them to no longer be properly associated with the site. I had to reconfigure my master theme and go through the site to fix the theme for each page. Now it works. Not sure what happened.

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/system/32/25301_2.png) [@system](https://forums.realmacsoftware.com/u/system)\
**Post date:** [December 23, 2019, 11:49pm UTC](https://forums.realmacsoftware.com/t/unable-to-publish-after-8-4-1-upgrade/29822/5 "2019-12-23T23:49:12Z")

</div>

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.