# Workman Target Stack Totally Misbehaving **URL:** \ **Category:** RapidWeaver Classic\ **Created:** [December 9, 2015, 5:05am UTC](https://forums.realmacsoftware.com/t/workman-target-stack-totally-misbehaving/4474 "2015-12-09T05:05:17Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Butternut](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/butternut/32/3946_2.png) [@Butternut](https://forums.realmacsoftware.com/u/Butternut)\ **Post date:** [December 9, 2015, 5:05am UTC](https://forums.realmacsoftware.com/t/workman-target-stack-totally-misbehaving/4474/1 "2015-12-09T05:05:17Z")
The attached images show the very simplest possible configuration of the Joe Workman Target Stack. I am completely baffled as to why the png is off center, rather than smack dab in the middle. Even worse, if I opt for relative to body or to parent rather than browser, it is even more off-center or disappears completely. If I reduce the image manually beforehand, instead of from within the target stack itself, the result is equally off center, this time in the other direction. Anyone? ![](https://europe1.discourse-cdn.com/flex005/uploads/realmacsoftware1/original/2X/3/361f7503d03620d592a825bc8fa887d0fb776039.jpg) ![](https://europe1.discourse-cdn.com/flex005/uploads/realmacsoftware1/original/2X/f/f539e8d40af6b59102f2c6f41c2fcb1e8f322a1d.jpg) ---
**Author:** ![t.o.fitzgerald1](https://avatars.discourse-cdn.com/v4/letter/t/c37758/32.png) [@t.o.fitzgerald1](https://forums.realmacsoftware.com/u/t.o.fitzgerald1)\ **Post date:** [December 9, 2015, 5:16am UTC](https://forums.realmacsoftware.com/t/workman-target-stack-totally-misbehaving/4474/2 "2015-12-09T05:16:07Z")
I do not personally have this Stack from Joe Workman. Usually, he is a very good craftsman with his Stacks, and I doubt he would have left this feature out. Please can you upload a screenshot of the image in Edit Mode and of the drop down menus on the right hand side “Inspector Menu” that say “Width” and “Position”. ---
**Author:** ![Butternut](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/butternut/32/3946_2.png) [@Butternut](https://forums.realmacsoftware.com/u/Butternut)\ **Post date:** [December 9, 2015, 5:21am UTC](https://forums.realmacsoftware.com/t/workman-target-stack-totally-misbehaving/4474/3 "2015-12-09T05:21:10Z")
You can see the Inspector settings in the images I have already uploaded. ---
**Author:** ![t.o.fitzgerald1](https://avatars.discourse-cdn.com/v4/letter/t/c37758/32.png) [@t.o.fitzgerald1](https://forums.realmacsoftware.com/u/t.o.fitzgerald1)\ **Post date:** [December 9, 2015, 5:39am UTC](https://forums.realmacsoftware.com/t/workman-target-stack-totally-misbehaving/4474/4 "2015-12-09T05:39:41Z")
If all you are wanting is to place the image in the center of the page. No text or anything else over the top of it/ in front of it. Step 1: Go into your Stack Library. Drag and drop onto your RapidWeaver page a “Image Stack”. Drag and drop the image you require into the Image Stack". Place the image into a Image Stack. I have provided screen shots below: [Screen Shot (DropBox)](https://dl.dropboxusercontent.com/u/51645354/Rapidweaver/Help%20Two/Screen%20Shot%202015-12-09%20at%2005.28.14.png) [Screen Shot (DropBox)](https://dl.dropboxusercontent.com/u/51645354/Rapidweaver/Help%20Two/Screen%20Shot%202015-12-09%20at%2005.29.31.png) ---
**Author:** ![t.o.fitzgerald1](https://avatars.discourse-cdn.com/v4/letter/t/c37758/32.png) [@t.o.fitzgerald1](https://forums.realmacsoftware.com/u/t.o.fitzgerald1)\ **Post date:** [December 9, 2015, 5:40am UTC](https://forums.realmacsoftware.com/t/workman-target-stack-totally-misbehaving/4474/5 "2015-12-09T05:40:19Z")
Step 2: Now under “Inspector” \> “Page” \> “Layout”. Make sure the Image Stack “Fill Mode:” is set to “Fixed Width”. Define the “Pixel Width” of the image. Set the “Align” to “Center”. I have provided screen shots below: [Screen Shot (Drop Box)](https://dl.dropboxusercontent.com/u/51645354/Rapidweaver/Help%20Two/Screen%20Shot%202015-12-09%20at%2005.29.49.png) [Screen Shot (Drop Box)](https://dl.dropboxusercontent.com/u/51645354/Rapidweaver/Help%20Two/Screen%20Shot%202015-12-09%20at%2005.30.01.png) ---
**Author:** ![teefers](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/teefers/32/8173_2.png) [@teefers](https://forums.realmacsoftware.com/u/teefers)\ **Post date:** [December 9, 2015, 2:18pm UTC](https://forums.realmacsoftware.com/t/workman-target-stack-totally-misbehaving/4474/6 "2015-12-09T14:18:05Z")
Having problem reading your inspector settings in your screen image but on the first one it appears you have the width set to a % link maybe 30? here is a shot of a target setting that centers a stack relative to parent (you can change to browser as well) ![](https://europe1.discourse-cdn.com/flex005/uploads/realmacsoftware1/original/2X/0/0f5b0021c0d5cbbba3d210488cd69e29293d5060.png) hope this helps. ---
**Author:** ![joeworkman](https://dub1.discourse-cdn.com/flex005/user_avatar/forums.realmacsoftware.com/joeworkman/32/23780_2.png) [@joeworkman](https://forums.realmacsoftware.com/u/joeworkman)\ **Post date:** [December 9, 2015, 4:16pm UTC](https://forums.realmacsoftware.com/t/workman-target-stack-totally-misbehaving/4474/7 "2015-12-09T16:16:15Z")
Interesting that no one has tried this before. The fix is to set set the width to be Fill. This is better than setting the width to 20% because when you are on a mobile device, 20% is going to be way too small.